Kammprofile Gasket With Integral Guide Ring (LS_IOR) is constructed with an integral guide ring for aligning purposes.
Kammprofile Gasket With Integral Guide Ring (LS_IOR) is constructed with an integral guide ring for aligning purposes.
It is suggested to be used in raised face flanges. The gasket is typically designed and sized per EN12560-6 spec for ASME B16.5 flanges, but can be manufactured to fit other standards.
Inward buckling of spiral wound gaskets remains a concern in the industry. Various industry committees are actively working to improve standards to address this issue. Some end users avoid using inner rings due to cost or bore intrusion. To meet this need, We offer LS_AB style gasket.
Kammprofile Gasket Without Guide Ring (LS_BST) is manufactured without a guide ring for tongue and groove, or recessed flange applications such as male and female.
The LS_SS style gasket is specifically designed for highly corrosive environments. It features a spiral wound construction with a conventional outer guide ring and a serrated inner ring, providing a dual sealing design that fully engages the raised face from the OD to the bore.
The LS_LL style gasket is engineered to seal effectively at lower seating stresses. With this design, the gasket requires less bolt load to seat while still delivering the same recovery capability as a standard spiral wound gasket.
