Insulation gasket kit are used o limit corrosion in pipeline systems. Where dissimilar metals are present, the sets remove the possibility of the systems acting as a galvanic cell and reduce the risk of galvanic corrosion of the pipework.
Insulation Sets
TYPE ‘R’ – Raised Face
TYPE ‘F’ – Full Face
TYPE ‘RJ’ – R.T.J
Characteristic
Insulation sets are used for pipeline flange corrosion protection and for complete electrical insulation protection where a seal is required between dissimilar flange materials.
There are three standard styles available to suit raised face, full face and ring grooved flanges.
Meterial:
Gasket:
– Gasket: JIC CODE / EQ
– Bolt / Nut / Sleeve / Washer: Special Material can be available as customer’s requirements.
– Insulation Resistance(Ω) ASTM D257-07: Usage Voltage: 1000V, Capacity of Tester : 2.0 × 1013 Ω
– Gasket: JIC CODE / EQ.
send enquiry >
The LS_RF style gasket shares the same construction features as a standard gasket but is specifically sized to serve as a replacement for flanges machined to accept oval or octagonal ring joint gaskets. The sealing element is positioned between the groove ID in the flange and the flange bore.
Inward buckling of spiral wound gaskets remains a concern in the industry. Various industry committees are actively working to improve standards to address this issue. Some end users avoid using inner rings due to cost or bore intrusion. To meet this need, We offer LS_AB style gasket.
Corrugated Metal Gasket is a high performance gasket for standard flange or heat exchange application, corrugated matal of virtually any alloy with flexible graphite on both sealing surface.
Application and Media: Heat exchangers, exhaust gases, vavle bonnet gasket, narrow flange.
High Temperature Kammprofile Gasket (LS_HIT) is a problem solver for higher operating temperature scenarios.
